Soundproofing Walls Solutions

M20 Panel
This solution is specifically designed to reduce airborne and impact noise through party walls. This is a very good solution to soundproof a wall when the space is an issue, when it is not possible to install thicker, more efficient soundproofing. That solution takes only 2 inches of wall space. Noise reduction: 50%-55%. All gaps will be sealed with an acoustic mastic. The solution can be upgraded with additional materials to increase the efficiency.

This solution consists:
– 20mm M20 panel
– 19mm Sound Plank
– 12.5 Soundshield plasterboard

The system can be upgraded with additional materials (optional costs)
– Green glue
– 3mm Acoustic membrane
– DB boards

M20

Independent wall
The Independent wall consists of a new timber frame with a small air gap between the existing wall and newly constructed frame. This solution significantly improves on airborne and impact noise being transmitted between two properties. Around 6-7 inches of wall space will be used for this solution. All gaps will be sealed with acoustic mastic. Noise reduction: 60%-70%. The solution can be upgraded with additional materials to increase the efficiency.

This solution consists:
– New timber frame
– 100mm RS60 Rockwool
– Resilient bars
– 19mm Sound Plank
– 12.5mm Soundshield plasterboard

The system can be upgraded with additional materials (optional costs):
– Green glue
– 3mm Acoustic membrane
– DB boards

Independent Genie Clip Wall System
The most effective party wall solution. Very similar to the Independent wall system, but more efficient thanks to the use of Genie clips (up to 7db). They are designed to absorb vibration and sound isolation. Noise reduction 70%-75%. Wall space loss 7.5 inches. Solution can be upgraded with additional materials to increase the efficiency.

This solution consists:
– New timber frame
– 100mm RS60 Rockwool
– Genie Clips with furring channels
– 19mm Sound Plank
– 12.5mm Soundshield plasterboard

The system can be upgraded with additional materials (optional costs):
– Green glue
– 3mm Acoustic membrane
– DB boards